View STG3699AQTR_2095044.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1/11 january 2005 high speed: t pd = 1.5ns (typ.) at v cc = 3.0v t pd = 1.5ns (typ.) at v cc = 2.3v ultra low power dissipation: i cc = 0.2 a (max.) at t a = 85c low "on" resistance v in =0v: r on = 0.5 ? (max. t a = 25c) at v cc = 2.7v r on = 0.7 ? (max. t a = 25c) at v cc = 2.3v r on = 1.5 ? (max. t a = 25c) at v cc = 1.8v wide operating voltage range: v cc (opr) = 1.65v to 4.3v single supply 4.3v tolerant and 1.8v compatible threshold on digital control input at v cc = 2.3 to 3.0v latch-up performance exceeds 300ma (jesd 17) description the stg3699a is an high-speed cmos low voltage quad analog s.p.d.t. (single pole dual throw) switch or 2:1 multiplexer/ demultiplexer switch fabricated in silicon gate c 2 mos technology. it is designed to operate from 1.65v to 4.3v, making this device ideal for portable applications. it offers very low on-resistance (<0.5 ? ) at v cc =3.0v. the nin inputs are provided to control the switches. the switches ns1 are on (they are connected to common ports dn) when the nin input is held high and off (high impedance state exists between the two ports) when nin is held low; the switches ns2 are on (they are connected to common ports dn) when the nin input is held low and off (high impedance state exists between the two ports) when in is held high. additional key features are fast switching speed, break before make delay time and ultra low power consumption. all inputs and outputs are equipped with protection circuits against static discharge, giving them esd immunity and transient excess voltage. it?s available in the commercial temperature range in qfn16 3x3mm package. stg3699a low voltage 0.5 ? max quad spdt switch with break before make feature figure 1: pin connection table 1: order codes package t & r qfn16 (3x3) STG3699AQTR qfn16 (3x3) rev. 2
stg3699a 2/11 figure 2: input equivalent circuit table 2: pin description table 3: truth table (*) high impedance table 4: absolute maximum ratings absolute maximum ratings are those values beyond which damage to the device may occur. functional operation under these conditi ons not implied. (1) derate above 70c: by 18.5mw/c. table 5: recommended operating conditions 1) truth table guaranteed: 1.2v to 4.3v. pin n symbol name and function 15, 3, 7, 11, 1, 5, 9, 13 1s1 to 4s1, 1s2 to 4s2 independent channels 16, 4, 8, 12 d1 to d4 common channels 2, 10 1-2in, 3-4in controls 14 v cc positive supply voltage 6 gnd ground (0v) in switch s1 switch s2 h on off(*) l off(*) on symbol parameter value unit v cc supply voltage -0.5 to 4.6 v v i dc input voltage -0.5 to v cc + 0.5 v v ic dc control input voltage -0.5 to 4.6 v v o dc output voltage -0.5 to v cc + 0.5 v i ikc dc input diode current on control pin (v in < 0v) ? 50 ma i ik dc input diode current (v in < 0v) 50 ma i ok dc output diode current 20 ma i o dc output current 300 ma i op dc output current peak (pulse at 1ms, 10% duty cycle) 500 ma i cc or i gnd dc v cc or ground current 100 ma p d power dissipation at t a = 70c (1) 1120 mw t stg storage temperature -65 to 150 c t l lead temperature (10 sec) 300 c symbol parameter value unit v cc supply voltage (note 1) 1.65 to 4.3 v v i input voltage 0 to v cc v v ic control input voltage 0 to 4.3 v v o output voltage 0 to v cc v t op operating temperature -55 to 125 c dt/dv input rise and fall time control input v cc = 1.65v to 2.7v 0 to 20 ns/v v cc = 3.0v to 4.3v 0 to 10
stg3699a 3/11 table 6: dc specifications note 1: ? r on = r on(max) - r on(min) . note 2: flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the speci fied analog signal ranges. symbol parameter test conditions value unit v cc (v) t a = 25c -40 to 85c -55 to 125c min. typ. max. min. max. min. max. v ih high level input voltage 1.65-1.95 0.65v cc 0.65v cc 0.65v cc v 2.3-2.5 1.2 1.2 1.2 2.7-3.0 1.3 1.3 1.3 3.3 1.4 1.4 1.4 3.6 1.5 1.5 1.5 4.3 1.6 1.6 1.6 v il low level input voltage 1.65-1.95 0.25 0.25 0.25 v 2.3-2.5 0.25 0.25 0.25 2.7-3.0 0.25 0.25 0.25 3.3 0.30 0.30 0.30 3.6 0.30 0.30 0.30 4.3 0.40 0.40 0.40 r on switch on resistance 4.3 v s =0v to v cc i s =100ma 0.35 0.45 0.50 ? 3.0 0.40 0.50 0.60 2.7 0.40 0.50 0.60 2.3 0.45 0.70 0.80 1.8 0.55 1.5 2.0 1.65 0.65 1.5 2.0 ? r on on resistance match between channels (1) 2.7 v s @ r on max i s =100ma 0.06 ? r flat on resistance flatness (2) 4.3 v s =0v to v cc i s =100ma 0.15 0.20 0.20 ? 3.0 0.15 0.20 0.20 2.7 0.15 0.20 0.20 2.3 0.20 0.25 0.25 1.65 0.30 0.35 0.35 i off off state leakage current (nsn), (dn) 4.3 v s =0.3 or 4v 20 100 na i in input leakage current 0 - 4.3 v in = 0 to 4.3v 0.1 1 a i cc quiescent supply current 1.65-4.3 v in =v cc or gnd 0.05 0.2 1 a i cclv quiescent supply current low voltage driving 4.3 v 1-2in, v 3-4in = 1.65v 37 50 100 a v 1-2in, v 3-4in = 1.80v 33 40 50 v 1-2in, v 3-4in = 2.60v 12 20 30
stg3699a 4/11 table 7: ac electrical characteristics (c l = 35pf, r l = 50 ?, t r = t f 5ns) table 8: analog switch characteristics (c l = 5pf, r l = 50 ? , t a = 25c) note 1: off isolation = 20log 10 (v d /v s ), v d = output. v s = input to off switch symbol parameter test condition value unit v cc (v) t a = 25c -40 to 85c -55 to 125c min. typ. max. min. max. min. max. t plh, t phl propagation delay 1.65-1.95 v i =open 0.45 ns 2.3-2.7 0.40 3.0-3.3 0.30 3.6-4.3 0.30 t on turn-on time 1.65-1.95 v s =0.8v 120 ns 2.3-2.7 v s =1.5v 45 55 65 3.0-3.3 42 55 65 3.6-4.3 40 55 65 t off turn-off time 1.65-1.95 v s =0.8v 22 ns 2.3-2.7 v s =1.5v 18 30 40 3.0-3.3 16 30 40 3.6-4.3 15 30 40 t d break before make time delay 1.65-1.95 c l =35pf r l = 50 ? v s =1.5v 10 80 ns 2.3-2.7 10 60 3.0-3.3 10 55 3.6-4.3 10 50 q charge injection 1.65-1.95 c l = 100pf r l = 1m ? v gen = 0v r gen = 0 ? pc 2.3-2.7 200 3.0-3.3 200 3.6-4.3 200 symbol parameter test condition value unit v cc (v) t a = 25c -40 to 85c -55 to 125c min. typ. max. min. max. min. max. oirr off isolation (1) 1.65-4.3 v s = 1v rms f= 100khz -64 db xtalk crosstalk 1.65-4.3 v s = 1v rms f= 100khz -54 db thd total harmonic distortion 2.3-4.3 r l = 600 ? v in = 2v pp f= 20hz to 20khz 0.03 % bw -3db bandwidth 1.65-4.3 r l = 50 ? 50 mhz c in control pin input capacitance 5 pf c sn sn port capaci- tance 3.3 f= 1mhz 30 c d d port capaci- tance when switch is enabled 3.3 f= 1mhz 84
stg3699a 5/11 figure 3: on resistance figure 4: off leakage figure 5: off isolation figure 6: bandwidth figure 7: channel to channel crosstalk
stg3699a 6/11 figure 8: test circuit c l = 5/35pf or equivalent (includes jig and probe capacitance) r l = 50 ? or equivalent r t = z out of pulse generator (typically 50 ? ) figure 9: break before make time delay figure 10: switching time and charge injection (v gen =0v, r gen =0 ? , r l =1m ? , c l =100pf)
stg3699a 7/11 table 9: turn on, turn off delay time
stg3699a 8/11 dim. mm. inch min. typ max. min. typ. max. a 0.80 0.90 1.00 0.032 0.035 0.039 a1 0.02 0.05 0.001 0.002 a3 0.20 0.008 b 0.18 0.25 0.30 0.007 0.010 0.012 d 3.00 0.118 d2 1.55 1.70 1.80 0.061 0.067 0.071 e 3.00 0.118 e2 1.55 1.70 1.80 0.061 0.067 0.071 e 0.50 0.020 k 0.20 0.008 l 0.30 0.40 0.50 0.012 0.016 0.020 r 0.09 0.006 qfn16 (3x3) mechanical data e a a1 e k e2 b r d2 k l a3 d
stg3699a 9/11 dim. mm. inch min. typ max. min. typ. max. a 330 12.992 c 12.8 13.2 0.504 0.519 d20.2 0.795 n60 2.362 t 18.4 0.724 ao 3.3 0.130 bo 3.3 0.130 ko 1.1 0.043 po 4 0.157 p 8 0.315 tape & reel qfnxx/dfnxx (3x3) mechanical data
stg3699a 10/11 table 10: revision history date revision description of changes 24-nov-2004 1 first release. 13-jan-2005 2 i cclv is changed on table 6.
stg3699a 11/11 information furnished is believed to be accurate and reliable. however, stmicroelectronics assumes no responsibility for the co nsequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of stmicroelectronics. specifications mentioned in this publicati on are subject to change without notice. this publication supersedes and replaces all information previously supplied. stmicroelectronics prod ucts are not authorized for use as critical components in life support devices or systems without express written approval of stmicroelectro nics. the st logo is a registered trademark of stmicroelectronics all other names are the property of their respective owners ? 2005 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of STG3699AQTR

	To Download STG3699AQTR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .